Technical Specifications – COB LED Strip 1m
Our 1-meter COB LED strip delivers dot-free, high-efficiency lighting in a compact form. Perfect for precise layouts, it’s available in 12V and 24V, with waterproof variants and high CRI output for professional-grade applications.
| Parameter |
Specification |
| Length |
1 meter (39.4 inches) |
| Voltage |
12V DC / 24V DC |
| Power Consumption |
10–15 watts per meter |
| LED Density |
480–512 LEDs per meter |
| Color Temps |
2700K–6500K / RGB / RGBW |
| CRI |
CRI ≥90 (High Color Accuracy) |
| IP Rating |
IP20 / IP65 / IP68 |
| Cuttable |
Every 25mm (Custom-fit layout) |
| Beam Angle |
180° Wide Illumination |
| Certifications |
CE, RoHS, UL |
How to Install a COB LED Strip 1m
Installing a 1-meter COB LED strip is a great way to enhance any residential, commercial, or display space with seamless and efficient lighting. Known for their dotless glow, compact form factor, and precision brightness, these short-length COB LED strips are ideal for cabinet lighting, shelf illumination, or detailed architectural designs.
Whether you’re a contractor or DIY installer, this guide explains how to install the product efficiently using VST Lighting’s premium solutions.
Choosing the Right Configuration
Before you begin, select the right version for your application. Options include 12V or 24V DC input, depending on the power run distance and design. If your project requires better energy efficiency and longer strip runs with minimal voltage drop, 24V is ideal.
For dynamic lighting effects, RGB and RGBW models are available. Installations in wet or outdoor areas benefit from IP65 or IP68 waterproof versions, while indoor applications may only require IP20 protection.
Preparing Tools and Materials
For a smooth installation, gather a suitable power driver (12V or 24V), wire connectors or solder tools, and optionally, an LED dimmer or controller if you’re using dimmable strips.
It’s recommended to use aluminum profiles for better thermal management, a cleaner finish, and extended lifespan. Double-sided adhesive backing simplifies mounting, but additional fasteners may be used for extra support, especially on uneven surfaces.
Surface Cleaning and Layout Planning
Thoroughly clean the surface where the LED strip will be installed. This ensures optimal adhesion of the strip and avoids premature peeling. If your design includes corners, edges, or detailed contours, pre-plan your layout to make full use of the strip’s flexibility and 25mm cuttable points.
For aesthetic and heat management purposes, mount the strip into aluminum channels or LED profiles where possible.
Attaching the LED Strip Securely
Once the surface is ready, peel the protective backing from the adhesive tape and apply the strip evenly along the layout path. Gently press and hold the strip in place for a few seconds to reinforce the bond.
If using connectors or corner joints, make sure the electrical contact is solid to avoid flickering. The cuttable nature of the 1-meter strip allows installers to trim the tape at marked sections to fit custom dimensions perfectly.
Connecting the Power Supply
Wiring the strip to the power supply is straightforward. Identify the positive and negative terminals and match them to the driver outputs. If your strip supports dimming, connect a compatible dimmer (PWM, TRIAC, or DALI) between the driver and the strip.
For RGBW options, use the appropriate controller to manage colors and brightness settings.
For better current distribution and reduced brightness loss, especially in series configurations, consider injecting power at both ends of the strip or installing short-length segments powered individually.
Waterproof Sealing and Final Testing
If the strip is being installed in humid, wet, or outdoor environments, seal the connections with waterproof silicone caps or gel tape. Secure the ends of the strip to prevent moisture ingress and use IP-rated drivers and controllers to maintain full protection.
After powering on the system, check for consistent brightness, color accuracy, and response to dimming or control inputs.
Final Thoughts
VST Lighting’s 1-meter COB LED strips are designed for professionals and bulk buyers looking for precision, durability, and performance. With CE, RoHS, and UL certifications, flexible customization options, and full OEM support, these strips are ideal for retail displays, cabinet illumination, and compact architectural features.
Proper installation not only extends product lifespan but also ensures optimal visual impact—making every project shine from start to finish.
