China's #1 Excellently Built LED PIR Floodlight
If you sell lightning as a wholesaler or work as an electrical contractor, VST is a reliable source of LED PIR floodlight. You can buy flood lights with PIR in bulk at VST. If you need unique designs or sizes based on your project or market demand, VST is available for such production.
10 Years Production Experience LED PIR Floodlight Manufacturer
LED PIR floodlight is a variation of flood lights used in an outdoor area. This floodlight with PIR(passive Infrared) sensor detects infrared emissions. VST manufactures this design of flood flight for security application, and in parking lots to provide pristine brightness as needed. The PIR flood light uses its sensor to detect the body in close range and triggers the bulbs to brighten up adequately.
VST, Top Supplier and Distributor of the Best Flood Lights with PIR
As you look to obtain LED PIR floodlights at VST, a few features stand out. You may purchase large quantities of white PIR floodlights or types with a warmer cooler tone. This means you can go for 4500K or the 6000K capacity. White LED flood light gives a daylight brightness for optimum clarity especially in enclosed areas like some types of parking lots.
VST manufactures one of the best PIR flood lights. What is considered one of the best LED PIR flood light must have LED technology. LEDs give better brightness compared to other forms of lighting. With improved lighting, the LED system doesn’t consume energy. It allows the LED PIR flood light to last long. The flood light gets as much as 50,000 hours of runtime and requires little maintenance.
You would notice the casing of the LED PIR flood light is made of die-cast aluminum and tempered glass. A casing of this sort prevents different types of damages and prolongs the life of the LED PIR flood light.
The IP65 PIR flood light is protected against water damage. The coating on it prevents water penetration. It further has anti fog and heat dissipation systems.
If you purchase this outdoor PIR floodlight at VST, you are sure to get high lumen capacity, high wattage, and excellent CRI. You can purchase the LED PIR floodlight with remote control. The remote control facilitates easy control of the lighting.
Reach out to VST today to get a quote!
- Manufacturing
- Data Sheet
- Applications
- Installation
- Customer Reviews
LED Flood Light Model A Options | ||||||||
Model NO. | VST-FL-10WA | VST-FL-20WA | VST-FL-30WA | VST-FL-50WA | VST-FL-100WA | VST-FL-150WA | VST-FL-200WA | |
Watt | 10W | 20W | 30W | 50W | 100W | 150W | 200W | |
Size | 130*100*45mm | 174*134*45mm | 215*176*48mm | 326*276*52mm | 326*276*52mm | 386*306*60mm | 464*355*66mm | |
Lumens | 1200~1300lm | 2400~2600lm | 3600~3900lm | 6000~6500lm | 12000~13000lm | 18000~19500 | 24000~26000lm | |
Lumen Efficiency | 120~130lm/w | |||||||
Working Voltage | AC85~265V, AC100~277V, AC200~240V, DC12V / 24V; 50/60Hz | |||||||
PF | >0.95 | |||||||
THD | <15% | |||||||
Color Temperature | 3000~3500K, 4000~4500K, 5000~5500K, 6000~6500K | |||||||
CRI | CRI>80 | |||||||
LED Chip | OSRAM / Philips Lumiled | |||||||
LED Driver | Meanwell/Sosen | |||||||
Materials | Aluminum alloy + tempered glasses | |||||||
Beam Angle | 120° | |||||||
Working Temperature | -35℃ ~ +50℃ | |||||||
IP Rate | IP66 | |||||||
IK Rate | IK 08 | |||||||
Lifespan | 50,000hrs | |||||||
Dimmable option | optional 0~10V, 1~10V, DALI | |||||||
Warranty | 3 years / 5 years | |||||||
Package | Foam+Carton 58*39*19cm Q’ty: 30pcs/CTN G.W.: 18kg/CTN 20ft: 19500pcs 40ft: 40500pcs 40ft HQ: 47460pcs |
Foam+Carton 60*35*23cm Q’ty: 20pcs/CTN G.W.: 19kg/CTN 20ft: 11600pcs 40ft: 24020pcs 40ft HQ: 28160pcs |
Foam+Carton 63*35*26cm Q’ty: 15pcs/CTN G.W.: 23.5kg/CTN 20ft: 7320pcs 40ft: 15165pcs 40ft HQ: 17790pcs |
Foam+Carton 54*39*33cm Q’ty: 10pcs/CTN G.W.: 23kg/CTN 20ft: 4030pcs 40ft: 8350pcs 40ft HQ: 9790pcs |
Foam+Carton 46*35*40cm Q’ty: 5pcs/CTN G.W.: 21kg/CTN 20ft: 2175pcs 40ft: 4505pcs 40ft HQ: 5280pcs |
Foam+Carton 39*38*46cm Q’ty: 4pcs/CTN G.W.: 21.5kg/CTN 20ft: 1640pcs 40ft: 3400pcs 40ft HQ: 3988pcs |
Foam+Carton 40*30*50cm Q’ty: 3pcs/CTN G.W.: 22kg/CTN 20ft: 1398pcs 40ft: 2898pcs 40ft HQ: 3399pcs |
|
LED Flood Light Model B Options | ||||||||
Model NO. | VST-FL-10WB | VST-FL-20WB | VST-FL-30WB | VST-FL-50WB | VST-FL-80WB | VST-FL-100WB | VST-FL-150WB | VST-FL-200WB |
Watt | 10W | 20W | 30W | 50W | 80W | 100W | 150W | 200W |
Size | 130*100*45mm | 174*134*45mm | 215*176*48mm | 276*224*48mm | 326*276*52mm | 326*276*52mm | 386*306*60mm | 464*355*66mm |
Lumens | 1200~1300lm | 2400~2600lm | 3600~3900lm | 6000~6500lm | 9600~10400 | 12000~13000lm | 18000~19500 | 24000~26000lm |
Lumen Efficiency | 120~130lm/w | |||||||
Working Voltage | AC85~265V, AC100~277V, AC200~240V, DC12V / 24V; 50/60Hz | |||||||
PF | >0.95 | |||||||
THD | <15% | |||||||
Color Temperature | 3000~3500K, 4000~4500K, 5000~5500K, 6000~6500K | |||||||
CRI | CRI>80 | |||||||
LED Chip | OSRAM / Philips Lumiled | |||||||
LED Driver | Meanwell/Sosen | |||||||
Materials | Aluminum alloy + tempered glasses | |||||||
Beam Angle | 120° | |||||||
Working Temperature | -35℃ ~ +50℃ | |||||||
IP Rate | IP66 | |||||||
IK Rate | IK 08 | |||||||
Lifespan | 50,000hrs | |||||||
Dimmable option | optional 0~10V, 1~10V, DALI | |||||||
Warranty | 3 years / 5 years | |||||||
Package | Foam+Carton 58*39*19cm Q’ty: 30pcs/CTN G.W.: 18kg/CTN 20ft:19500pcs 40ft:40500pcs 40ft HQ:47460pcs |
Foam+Carton 60*35*23cm Q’ty: 20pcs/CTN G.W.: 19kg/CTN 20ft:11600pcs 40ft:24020pcs 40ft HQ:28160pcs |
Foam+Carton 63*35*26cm Q’ty: 15pcs/CTN G.W.: 23.5kg/CTN 20ft:7320pcs 40ft:15165pcs 40ft HQ:17790pcs |
Foam+Carton 54*39*33cm Q’ty: 10pcs/CTN G.W.: 23kg/CTN 20ft:4030pcs 40ft:8350pcs 40ft HQ:9790pcs |
Foam+Carton 54*39*33cm Q’ty: 10pcs/CTN G.W.: 23kg/CTN 20ft:4030pcs 40ft:8350pcs 40ft HQ:9790pcs |
Foam+Carton 46*35*40cm Q’ty: 5pcs/CTN G.W.: 21kg/CTN 20ft:2175pcs 40ft:4505pcs 40ft HQ:5280pcs |
Foam+Carton 39*38*46cm Q’ty: 4pcs/CTN G.W.: 21.5kg/CTN 20ft:1640pcs 40ft:3400pcs 40ft HQ:3988pcs |
Foam+Carton 40*30*50cm Q’ty: 3pcs/CTN G.W.: 22kg/CTN 20ft:1398pcs 40ft:2898pcs 40ft HQ:3399pcs |
LED Flood Light Model C Options | ||||||||
Model NO. | VST-FL-250WC | VST-FL-500WC | VST-FL-750WC | VST-FL-1000WC | VST-FL-1250WC | |||
Watt | 250W | 500W | 750W | 1000W | 1250W | |||
Size | 460*220*110mm | 460*400*110mm | 380*380*176mm | 460*765*110mm | 500*1075*310 | |||
Lumens | 33000lm | 66000lm | 100000lm | 130000lm | 170000lm | |||
Lumen Efficiency | 140lm/w, 160lm/w, for options | |||||||
Working Voltage | AC85~265V, AC100~277V / 347V, AC200~240V; 50/60Hz | |||||||
PF | >0.95 | |||||||
THD | <15% | |||||||
Color Temperature | 3000~3500K, 4000~4500K, 5000~5500K, 6000~6500K | |||||||
CRI | CRI>80, CRI>70 | |||||||
LED Chip | OSRAM / Philips Lumiled | |||||||
LED Driver | Meanwell/Sosen | |||||||
Materials | Die-cast aluminum + PC cover | |||||||
Beam Angle | 10/25/45/60/90/120°, 130*30*60°/130*60*25° | |||||||
Working Temperature | -35℃ ~ +50℃ | |||||||
IP Rate | IP66 | |||||||
IK Rate | IK 08 | |||||||
Lifespan | 50,000hrs | |||||||
Dimmable option | optional 0~10V | |||||||
Warranty | 3 years / 5 years | |||||||
Package | Foam+Carton 55*44*20cm Q’ty:1 unit/CTN G.W.: 9.5kg/CTN 20ft:578pcs 40ft:1198pcs 40ft HQ:1405pcs |
Foam+Carton 62*55*20cm Q’ty: 1 unit/CTN G.W.: 17kg/CTN 20ft:410pcs 40ft:850pcs 40ft HQ:997pcs |
Foam+Carton 69*56*25cm Q’ty: 1 unit/CTN G.W.: 23kg/CTN 20ft:290pcs 40ft:600pcs 40ft HQ:704pcs |
Foam+Carton 86*55*25cm Q’ty: 1 unit/CTN G.W.: 29kg/CTN 20ft:236pcs 40ft:490pcs 40ft HQ:575pcs |
Foam+Carton 108*62*30cm Q’ty: 1 unit/CTN G.W.: 37kg/CTN 20ft:139pcs 40ft:288pcs 40ft HQ:338pcs |
|||
LED Flood Light Model D Options | ||||||||
Model NO. | VST-FL-400WD | VST-FL-500WD | VST-FL-800WD | VST-FL-1000WD | VST-FL-1200WD | |||
Watt | 400W | 500W | 800W | 1000W | 1200W | |||
Size | 495*440*520mm | 495*440*520mm | 650*590*510mm | 650*590*510mm | 650*590*510mm | |||
Lumens | 60000lm | 75000lm | 120000lm | 150000lm | 180000lm | |||
Lumen Efficiency | 140~150lm/w | |||||||
Working Voltage | AC85~265V, AC100~277V / 347V, AC200~240V; 50/60Hz | |||||||
PF | >0.95 | |||||||
THD | <15% | |||||||
Color Temperature | 3000~3500K, 4000~4500K, 5000~5500K, 6000~6500K | |||||||
CRI | CRI>80, CRI>70 | |||||||
LED Chip | OSRAM / Philips Lumiled | |||||||
LED Driver | Meanwell/Sosen | |||||||
Materials | Die-cast aluminum + PC cover | |||||||
Beam Angle | 8/25/45/60/90° | |||||||
Working Temperature | -35℃ ~ +50℃ | |||||||
IP Rate | IP66 | |||||||
IK Rate | IK 08 | |||||||
Lifespan | 50,000hrs | |||||||
Dimmable option | optional 0~10V | |||||||
Warranty | 3 years / 5 years | |||||||
Package | Foam+Carton 55*50*50cm Q’ty:1 unit/CTN G.W.: 16kg/CTN 20ft:203pcs 40ft:421pcs 40ft HQ:494pcs |
Foam+Carton 55*50*50cm Q’ty: 1 unit/CTN G.W.: 16kg/CTN 20ft:203pcs 40ft:421pcs 40ft HQ:494pcs |
Foam+Carton 71*66*61cm Q’ty: 1 unit/CTN G.W.: 30kg/CTN 20ft:98pcs 40ft:202pcs 40ft HQ:238pcs |
Foam+Carton 71*66*61cm Q’ty: 1 unit/CTN G.W.: 30kg/CTN 20ft:98pcs 40ft:202pcs 40ft HQ:238pcs |
Foam+Carton 71*66*61cm Q’ty: 1 unit/CTN G.W.: 30kg/CTN 20ft:98pcs 40ft:202pcs 40ft HQ:238pcs |
|||
LED Flood Light Model Options | ||||||||
Model NO. | VST-FL-150WE | VST-FL-300WE | VST-FL-450WE | VST-FL-600WE | VST-FL-750WE | VST-FL-900WE | VST-FL-1050WE | VST-FL-1200WE |
Watt | 150W | 300W | 450W | 600W | 750W | 900W | 1050W | 1200W |
Size | 152*492*140cm | 316*492*156cm | 430*492*156cm | 556*492*156cm | 670*492*156cm | 778*492*156cm | 890*492*156cm | 1022*492*156cm |
Lumens | 24000lm | 48000lm | 72000lm | 96000lm | 12000lm | 144000lm | 168000lm | 192000lm |
Lumen Efficiency | 160lm/w | |||||||
Working Voltage | AC85~265V, AC100~277V / 347V, AC200~240V; 50/60Hz | |||||||
PF | >0.95 | |||||||
THD | <15% | |||||||
Color Temperature | 3000~3500K, 4000~4500K, 5000~5500K, 6000~6500K | |||||||
CRI | CRI>80, CRI>70 | |||||||
LED Chip | OSRAM / Philips Lumiled | |||||||
LED Driver | Meanwell/Sosen | |||||||
Materials | Die-cast aluminum + PC cover | |||||||
Beam Angle | Symmetrical 30°/45°/60°/90°; Asymmetrical 80*140°/ 120*40°*60° | |||||||
Working Temperature | -35℃ ~ +50℃ | |||||||
IP Rate | IP66 | |||||||
IK Rate | IK 08 | |||||||
Lifespan | 50,000hrs | |||||||
Dimmable option | optional 0~10V | |||||||
Warranty | 3 years / 5 years | |||||||
Package | Foam+Carton 52*19*18cm Q’ty:1 unit/CTN G.W.: 5.5kg/CTN 20ft:1575pcs 40ft:3261pcs 40ft HQ:3824pcs |
Foam+Carton 52*36*18cm Q’ty: 1 unit/CTN G.W.: 9.5kg/CTN 20ft:830pcs 40ft:1721pcs 40ft HQ:2018pcs |
Foam+Carton 52*47*19cm Q’ty: 1 unit/CTN G.W.: 13.5kg/CTN 20ft:602pcs 40ft:1249pcs 40ft HQ:1464pcs |
Foam+Carton 52*59*19cm Q’ty: 1 unit/CTN G.W.: 17.5kg/CTN 20ft:480pcs 40ft:995pcs 40ft HQ:1166pcs |
Foam+Carton 52*72*20cm Q’ty:1 unit/CTN G.W.: 22kg/CTN 20ft:374pcs 40ft:774pcs 40ft HQ:908pcs |
Foam+Carton 52*80*20cm Q’ty: 1 unit/CTN G.W.: 29kg/CTN 20ft:336pcs 40ft:697pcs 40ft HQ:817pcs |
Foam+Carton 56*82*20cm Q’ty: 1 unit/CTN G.W.: 31kg/CTN 20ft:304pcs 40ft:631pcs 40ft HQ:740pcs |
Foam+Carton 59*108*20cm Q’ty: 1 unit/CTN G.W.: 35kg/CTN 20ft:219pcs 40ft:455pcs 40ft HQ:533pcs |

Knowing as friends since 2010, we are always working together. Just like what he says in the video, “from 60,000pcs I only had a few breakdowns which were directly, immediately replaced”. There are still tens of spare drivers we sent to him in case of breakdown in their warehouse because they don’t need them at all.
We know each other in late 2013, right after testing for 4pcs samples, a 800pcs order is placed and the collaboration keeps going well. We do a big project together but due to the agreement, we can’t say more details here.
Their company is an electrical contractor, doing many projects. We started to work together since 2013. Continuous purchasing LED products from us like 2G11 and T8 LED Tube. Now trying our LED Flood Light and Street Light, believe to expand cooperation soon.
The Best High quality LED Flood with PIR System
To install the PIR LED flood lights, VST has field engineers on standby. You can request their service to have a seamless installation process. Their experience and technical know-how will be most beneficial to your project.
The flood light with PIR comes with a 3-5 years warranty. With our good delivery system at VST, you can enjoy fast and hassle-free delivery of your bulk purchases. VST has over 10 years of experience in LED lighting production and carries out regular research to improve product quality.
Get great prices and top-quality LED PIR flood light with UL marking and RoHS certification at VST today!

LED PIR Floodlight | The Ultimate FAQ Guide
Introduction
LED PIR floodlights are used widely nowadays as outdoor lighting fixtures.
You can use these floodlights in any of your premises (office or home) outdoors for security and safety.
Sometimes floodlights are used to highlight building architecture or landscapes, highlighting the sign or name of your company, and so on.
This FAQ guide will help you to understand everything about the best PIR floodlights with LED and will try to provide solutions to all your questions.
Table Of Contents
- What Is LED PIR FloodLight?
- How Does The PIR Floodlight Work?
- Can You Add A PIR To Any Light?
- What Materials Are Used By The Manufacturer To Build LED PIR Floodlights?
- Do PIR Floodlights Work In Daylight?
- How Do You Choose LED PIR Floodlights?
- Where Can LED PIR Floodlights Be Used?
- What Are The Advantages Of LED PIR Floodlights?
- What Is The Difference Between PIR And IR?
- What Is The Best LED PIR Floodlight?
- Why Does Your PIR Floodlight Stay On?
- How Can You Set-Up Your LED PIR Floodlight Easily?
- How Do You Fix A LED PIR Floodlight With Remote Control?
- What Is The Process To Convert A 500W Halogen Light To A 10W LED PIR Floodlight?
- What Can Trigger The Sensor Of LED PIR Floodlights?
- How Bright Is A 30 Watt PIR Floodlight?
- Do The Sensors Of LED PIR Light Wear Out?
- What Is The Difference Between A LED PIR Flood Light And A Spotlight?
- Are LED PIR Floodlights Superior To Other Halogen Floodlights?
- What Troubles Can You Face Using An IP65 PIR Floodlight And How To Solve Them?
- Can Outdoor PIR Floodlights Be Harmful For Your Eyes?
1. What Is LED PIR FloodLight?
LED PIR floodlights, also known as passive infrared sensor floodlights are light-emitting diodes produced in low energy.

Compared to the price you have to pay for the LED PIR floodlight, it produces a huge amount of light.
The PIR Floodlights only activate when they detect movements.
They only emit light when you need them.
The LED floodlight with PIR provides an additional level of security to the residential and business premises for safety and security.
The outdoor PIR floodlights can be operated hands-free too.
So, you don’t have to lighten up by yourself when you are carrying packages in your hand.
You can externally attach a PIR (Passive Infrared Sensor) with any LED floodlight to gain lots of choices, designs, and models.
You can also connect multiple LED floodlights with a single sensor.
LED PIR floodlight is one of the best PIR floodlights made by the manufacturers of a company in a factory.
You can decorate your outdoors with proper lighting and keep burglars away.
2. How Does The PIR Floodlight Work?
The LED PIR floodlight works when it detects the motion of something passing by.
The output goes high to 3.3V and the PIR floodlight lightens up.
The sensor actually detects heat to get lighten up.
If the difference in the ambient temperature calculated in kelvin of the room gets detected by the sensor of PIR LED floodlights, then the LED gets to lighten up.
PIR sensors detect movements anywhere near the building or property.
It provides a signal to the control panel and triggers the alert, and lights up.
There is also a beam angle on which the light distribution occurs. The wider the beam angle gets, the more it covers the ground.
The IP65 PIR floodlight actually is water spray protected from all angles.
3. Can You Add A PIR To Any Light?
Yes, you can add a PIR to any light if you want to buy them from your supplier or from a company.
You don’t have to worry about not getting a light without a passive infrared sensor (PIR).

It is very easy to install a PIR into a floodlight.
To install a PIR, you need to turn off your power and verify it by trying to turn on the lights.
After you’ve verified, you have to unscrew your floodlight.
Take your PIR sensor and fix it with your floodlight.
After fixing the floodlight with PIR, you have to fix it again on the wall.
Make sure you have wired them properly so that they can work again.

This is how you can add a PIR sensor to any light.
Here is a link for you to visually understand how to add a PIR into a floodlight-
4. What Materials Are Used By The Manufacturer To Build LED PIR Floodlights?
There are many materials you will see when PIR LED floodlights are built by a Manufacturer in a factory.
Here are some of the manufacturing materials included below-
- ABS body material
- Aluminum, glass, and acrylic construction material
- Tempered glass lens
- Integrated LED lamp
- PIR (Passive Infrared Sensor)
- Power supply
- Positive and Negative wires
These are some of the materials used to manufacture the best PIR floodlight.
5. Do PIR Floodlights Work In Daylight?
Yes, PIR floodlights work fine in daylight.
PIR sensors are mainly used so that burglars can not harm your house or steal something.
When you adjust the PIR sensor to the sun position, the LED PIR floodlight will work the whole day well.
If you want to work your PIR floodlight out at night time, put it into the moon position.
You should take note that, if you put your PIR floodlight into the moon position, it will not work in the daylight.
At that time, it will work as a security light only which can detect motion after dusk.
But depending on you, you can adjust the fixture to be in your favor and work the whole day.
6. How Do You Choose LED PIR Floodlights?
Choosing the perfect and the proper PIR floodlight from your supplier for your outdoor security can be hard.
There are many manufacturers or suppliers who can provide you with low quality LED PIR floodlights.
Now, it can be a major question for you how to choose the proper LED PIR flood light for outdoor security management.
Here are some of the tips that you can learn about to choose your best LED PIR flood light from your supplier for your suitable purpose-
- The major point of a flood light is whether it can produce the proper amount of lumens or not.
A company does not provide different lumens of LED PIR floodlights.
There are different company who build different types of PIR LED flood lights by their own manufacturers.
The less the lumens of a floodlight is, the less it can produce brightness.
You can check in the VST Lighting in China for better lumen output.
They are one of the best companies in China who produce better lighting solutions in their factory.
So, choose by lumens than by watts when buying your LED PIR floodlights from your supplier. - Color temperature plays a very important role when it comes to LED PIR floodlights.
It is very important to buy a suitable LED PIR floodlight from your supplier with a good color temperature because it creates a mood of the space.
And there comes VST Lighting in China with the best lighting materials in their factory with proper color temperature.
The better the color temperature is, the better you can see the color clearly.

- You need to buy a PIR floodlight from your supplier depending on the detection of the heat motion.
So, check if the PIR sensor is strong enough or not to detect the proper standard or not to detect the person or animal.
7. Where Can LED PIR Floodlights Be Used?
LED PIR floodlights are mainly used in outside walls for motion detection.
Sometimes, they may be used indoors for several purposes.

Mainly they are manufactured in a factory used outside the gate of your office or house for safety and security.
As the outdoor PIR floodlight can detect motions, if any burglar tries to barge in, you can certainly learn his/her presence at once by watching the lighting.
8. What Are The Advantages Of LED PIR Floodlights?
If you are using LED PIR floodlights outside your premises, then you have done a great job!
These are the reasons why you should put PIR LED floodlights outside of your premises-
- As LED PIR floodlights only light up when someone passes by, you can save energy a lot.
- You can operate it hands-free, which means you do not have to manually command it to turn it on or off.
- You can detect the burglars based on your LED PIR floodlights turning on.
- LED PIR floodlights have built-in sensors, so you need not buy a separate PIR sensor.
9. What Is The Difference Between PIR And IR Sensors In A LED Floodlight?
A PIR sensor and an IR sensor work differently from each other.
Here are the differences between a PIR sensor and an IR sensor in a LED floodlight-
LED Flood With PIR | LED Flood With IR |
Non-Self-illuminating type | Self-illuminating type |
Face problems in the measurement of velocity and range of targets | Directly measure range and velocity of targets |
Can not function with dark and cold target | Functions a dark and cold target |
Can not be located by enemy sensors | Can be easily located by enemy sensors |
10. How Can You Choose The Best LED PIR Floodlight?
If you are asking specifically for the best PIR floodlight, comparatively rated with IP65 PIR Floodlights are the best in the market.
Depending on a lot of factors, they are chosen as the best LED PIR floodlights in the market.
IP65 white PIR floodlights are neat, compact, and provide everything you need.
They lumens around 750 lm, which is warm white, and 800 lm which is cool white.
You can get 10W, 20W, 50W, or even 100W of energy for your outdoor PIR floodlight.
The IP65 PIR floodlight lights over a 120-degree beam angle too, so you can get the whole area covered with it.
If any burglars or intruders try to trespass, these LED PIR floodlights will immediately catch them up.
You can also get different designs, black or white PIR floodlights when you buy.
11. Why Does Your PIR Floodlight Stay On?
Sometimes, when you fit your outdoor PIR floodlight, it may stay on.
It is either because the fitting has a faulty PIR unit, or it can be because of a live feed on the switched live of the fitting.
No other reasons are behind this incident that you are facing.
What you can do is, you need to observe the connection of the live feed of your LED PIR floodlight.
It is pretty easy to fix if you know the way to do so.
What you have to do is, check inside the light fitting terminals where you will find brown and blue (L and N) wiring, and the red as a switched live.
Just check them if they are in the correct order or not.
If not, take them to the correct orders and your LED PIR floodlight will be back on track again.
12. How Can You Set-Up Your LED PIR Floodlight Easily?
You can easily install your PIR LED floodlights outside of your garage or your door.

What you need to do is at first, you need to look for a place on the wall where you want to set it up.
Isolate the power first before you start your setup, it is mandatory.
To install the PIR floodlight, you need some screwdrivers
Check the circuit with the tester, look if the lines are dead or not.
Drill inside the wall where you want your LED PIR Floodlight to be installed.
Next, you need to cleanse the junction box for the conduit and the flaps which go to the line.
At last, mount your LED PIR Floodlight up to the wall, and it is done.
Here is a link for you to understand how to install a floodlight with PIR sensor-
13. How Do You Fix LEDs Of A LED PIR Floodlight With Remote Control?
When you are using an LED PIR floodlight with remote control, you might face some problems like your LEDs are not lightening.
You can easily fix them if you know how to do it.
If your LEDs are not working properly in your LED PIR floodlight with remote control, you can replace them with new LEDs inside.
First, you need to check which LEDs are not working.

To check that, you must make sure the silicon coating above the LEDs is removed.
Now, check one by one which is good and which is not working.
After checking, you might find some are working, and some are not.
Take off the LEDs which are not working from the board.
You should be careful when you take off the LEDs from the board.
Replace the LEDs which are not working with the new ones.
This is the process that you can use to fix the LEDs of a LED PIR floodlight with remote control.
Here is a visual view that can help you to understand the process better-
14. What Is The Process To Convert A 500W Halogen Light To A 10W LED PIR Floodlight?
There is a superfast way to convert a 500W halogen light to a 10W LED PIR floodlight.

If you convert to a 10W LED, you can save a lot of power and money from it.
To convert, what you need is a 500W halogen light, a 10W LED floodlight, and a passive infrared sensor.
First, you need to take off your 500W halogen after taking the glass front off.
Then, you need to unscrew the nuts and take out the reflector.
Cut the wires, you can solder them later when you fix your LED light.
Tap sometimes the holder with a hammer, aware of not breaking it.
Bend the holder to 90 degrees so that it can contain the 10W LED properly.
After that, put down your reflector again inside and fill the gaps.
Then the holder should be drilled to the aluminum and be bolted to the tabs.
Put on your heap compound pastor in the center after that.
Don’t put the little ones because you might end up with little air bubbles.
After that, push down your 10W LED inside that blob straight onto it.
After putting that, solder the wires with the LED light and you are done with converting the halogen light to LED light.
At last, what you have to do is take a PIR motion sensor and install it on the LED light.
Successfully, you can convert the 500W halogen light to a 10W LED PIR floodlight easily by this process.
15. What Can Trigger The Sensor Of LED PIR Floodlights?
There are many things that can trigger your LED floodlight with a PIR sensor.
- The PIR sensor can detect from 5 meters up to 12 meters.
Now, anything within this range can be a trigger to lighten up the LED floodlight with PIR.
But the object must produce heat energy in order to trigger the name of the passive infrared sensor.
- There is a cover named Fresnel Lens which detects the heat energy flows and triggers the LED flood with PIR.
After powering the sensor module, your LED flood with PIR needs about 20-60 seconds to warm up in order to function properly.
- It can be set up as a repeatable trigger mode or non-repeatable trigger mode.
If it is in repeatable trigger mode, whenever it detects a certain heat energy flow, the LED flood with PIR will get triggered up.
When the heat energy goes away or resets to the previous condition, the trigger will stop.
16. How Bright Is A 30 Watt PIR Floodlight?
A 30 watts PIR floodlight can be equivalent to a 300 watts halogen floodlight.
The lights that you use are measured in the lumens, the more the lumen the better the LED of the PIR floodlight is.
Not all the 30 watts LED PIR floodlights are top-spec.
The top-spec 30 watts LED PIR floodlights are 100 lumens per watt.
17. Do The Sensors Of LED PIR Light Wear Out?
No, the LED floodlight with the PIR sensor does not get worn out.
This is the best feature you can get in an outdoor PIR floodlight.
The PIR sensor is small, low power, wide lense ranged, inexpensive, rugged, and easy to use.
The two slots inside the PIR sensor are made of material sensitive to infrared radiation.
Your PIR sensor only goes on when it detects heat energy from a certain distance.
After the warm energy goes to normal, it stops radiating light within 20-60 seconds.
So, the sensor does not wear out when you are talking about an LED flood with PIR.
18. What Is The Difference Between A LED PIR Flood Light And A Spotlight?
An LED PIR floodlight and a spotlight have their main difference in the lighting system.
An LED PIR floodlight does not light depending on any switch.
It triggers when it finds the heat energy changes to lighten up.

On the other hand, a spotlight depends on the switch as it does not have any sensors in it.
Also, a white PIR floodlight has a great area coverage which is up to 120-degrees.
On the other hand, the spotlight depends on a spot that spreads a narrow beam of light, up to 45-degrees.
The spotlight concentrates on a point to control which a LED PIR light does not.
19. Are LED PIR Floodlights Superior To Other Halogen Floodlights?
On some points, LED PIR floodlights are superior to other halogen floodlights.
Here are the reasons why-
Lifespan
Most of the outdoor PIR floodlights with LED can last up to 30,000-35,000 hours.
The best PIR floodlights can last more than that amount of time.
On a contrary, halogens can last on average 15,000 hours.
Efficiency
LED floodlights with PIR have more efficiency than other halogen lights.
Even if they beam the same amount of lumens, LED PIR floodlights can save up to 60% of energy.
Maintenance
You do not have to maintain that many of your LED PIR floodlights after the installation.
But you need to change the bulbs of the halogens several times.
20. What Troubles Can You Face Using AN IP65 PIR Floodlight And How To Solve Them?
Your IP65 PIR floodlight might sometimes give you some trouble.
Here are the problems that you can face when using an IP65 PIR floodlight-
- PIR keeps getting activated without any reason
- The floodlight with PIR sensor is not operating properly.
- The detection range is changing every day, it is not the same as the first day.
- The floodlight with PIR sensor is not operating at night.
- In the operating mode, the floodlight will stay active for only 15 seconds.
- A Floodlight with PIR coverage is poor.
- The LED of the floodlight with PIR stays on all time at night.
These are the problems you might be facing right now which can be a headache.
Here are some tips for you that will fix your problems.
Troubleshooting Guide
- You might face the problem of false activation of a floodlight with PIR sensor.
To fix that, try using a cloth to cover the sensor totally.
This will help your sensor to prevent seeing anything. - If your PIR sensor does not operate at all, you should check your LED PIR floodlight with remote control.
If the switch is off, turn it on and try to see if it is working now or not.
If it is still not working, try to look if the connections of the wires are right or not. - The detection range can be a problem because your floodlight with PIR detects your heat energy to work.
The problem might occur because of the season changes.
If the ambient temperature is cold, the detection range of your floodlight with PIR sensor can be at the highest peak.
21. Can Outdoor PIR Floodlights Be Harmful To Your Eyes?
The LEDs of the floodlight with PIR illuminate the blue light which can be harmful to your retina.
Instead of this one demerit, you will get everything from the PIR LED floodlight as your advantage.
It can be irreparable for your retinas if they get too much damaged by the LED PIR floodlights.

Even the LED of the best PIR floodlights can harm your eyes.
If your eyes are too exposed to the LEDs continuously, there might be a time when it will not be fixed and also can not be replaced.
Just keep your eyes safe whenever the LED floods with PIR lightens up.
This will be the most effective way to keep your eyes better and safe.
You can even use glasses that reflect blue lights.
It can also help you to not get too many lights inside your eyes.
Final Words
LED PIR floodlights are very popular as they are cost-efficient and save a lot of money.
There are different designs like black or white PIR floodlights, and they are convenient to use.
You can use them on any premises you want, whether it be your house or your office.
For the high-tech and modern lighting solutions, you can visit the VST Lighting in China with long life lighting assurance and low power consumption ability.
If you want to buy an outdoor PIR floodlight in bulk, you can contact us.
We can provide you with the most reasonable price quotes.