150W LED Flood Light Manufacturer for Outdoor Project Supply
VST Lighting is a China-based 150W LED flood light manufacturer supporting distributors, contractors, importers, wholesalers, lighting solution providers, and OEM/ODM partners with reliable outdoor lighting solutions.
Our 150W LED flood lights are designed for parking lots, billboards, building exteriors, loading areas, warehouse yards, construction sites, sports courts, security perimeters, commercial plazas, and industrial outdoor spaces. We focus on project details that matter: strong brightness, weather protection, stable drivers, heat dissipation, beam control, bracket strength, and export-ready packaging.
Factory-direct China supply
OEM/ODM support available
Flexible MOQ for trials
Aging test before shipment
Outdoor project support
150W LED Flood Lights Built for Practical Outdoor Coverage and Lower Maintenance
A 150W LED flood light is usually selected when a project needs stronger outdoor illumination than small flood lights can provide, but does not require the size or power load of larger 200W or 300W fixtures. It is a practical choice for parking lots, warehouse yards, building exteriors, billboards, loading areas, construction sites, sports courts, and security zones where reliable coverage, controlled beam spread, and lower maintenance matter.
For B2B buyers, the sourcing risk is not only choosing the wrong wattage.
If the lumen output is overstated, the site may still have dark zones after installation. If the beam angle is too wide, light may spill into unwanted areas and reduce useful intensity. If the beam angle is too narrow, the project may show bright spots and uneven coverage. If the driver is unstable, the fixture may flicker, fail early, or struggle with voltage fluctuation. If the housing does not release heat properly, the 150W flood light can lose brightness faster during long outdoor operation. If the sealing structure is weak, water can enter through the cable gland, glass seal, screw holes, rear cover, or driver compartment. If the bracket is too thin, aiming and installation become less reliable on walls, poles, or temporary structures.
That is why a 150W LED flood light should not be selected only by wattage and price. A serious buyer needs to confirm lumen output, lm/W efficiency, beam angle, reflector design, input voltage, driver grade, surge protection, housing material, heat sink structure, IP rating, IK rating, CCT, CRI, cable entry, bracket strength, mounting method, dimming or sensor options, and export packaging before confirming a bulk order.
VST Lighting supports this process as a 150W LED flood light supplier in China with 10 years of LED lighting production experience. Our management team averages 9 years in the LED lighting business, and our trained production workers understand assembly, inspection, waterproof structure checking, and export packaging for outdoor lighting orders. Our engineers use integrating spheres to check lumen output, color temperature, and CRI. Aging racks help us review fixture stability before shipment. For project buyers who need stronger technical proof, photometric data and third-party LM-79 or LM-80 reports may be available depending on product model and order requirement.
We also understand the real project conditions behind flood lighting selection. A parking lot may need wide coverage with controlled glare. A billboard may need stable long-hour output and correct aiming. A building exterior may need beam control and clean appearance. A loading yard may need stronger brackets and surge protection. A construction site may need rugged housing and safe temporary mounting. A distributor may need private labels, carton marks, and repeatable packaging for local resale.
Your true cost is not only the fixture price. It includes lift rental, installation labor, dark-zone complaints, water-ingress failures, energy waste, replacement trips, damaged goods, delayed handover, and after-sales pressure from your local customer. VST Lighting helps reduce these risks by checking product structure, LED performance, driver matching, optical design, waterproof details, mounting accessories, packaging, and order requirements before mass production.
If you need a 150W LED flood light manufacturer that can support sample review, OEM/ODM customization, lighting layout advice, quality control, packaging confirmation, and shipment coordination, VST Lighting can help you build a safer sourcing plan from China.
Highlighted Features of 150w led flood light
150W LED flood lights provide strong but practical brightness for parking lots, yards, billboards, building exteriors, and commercial outdoor spaces.
IP-rated housing, sealed glass structure, cable-entry control, and gasket design help reduce water, dust, corrosion, and outdoor failure risk.
Aluminum housing, heat sink design, and matched drivers help manage heat pressure from long-hour outdoor operation.
Adjustable brackets, wall mounting, pole support, ground positioning, and project-specific accessories can support different flood lighting layouts.
LED Chips
LED chips decide brightness, efficiency, color consistency, and long-term lumen maintenance. For a 150W LED flood light, chip quality matters because the fixture is often used outdoors for long operating hours in parking lots, building exteriors, yards, and signage areas. VST Lighting can support LED options from suppliers such as Lumileds, Bridgelux, Osram, San’an, Epistar, or other approved sources depending on specification and order requirement. We help confirm lumen target, CCT, CRI, LED density, and batch consistency before production to reduce weak output, dark zones, and color mismatch.
LED Driver
The LED driver controls electrical stability, flicker behavior, surge resistance, power factor, dimming, and service life. A 150W LED flood light may need a constant-current driver, wide input voltage, surge protection, 0–10V dimming, DALI control, photocell compatibility, or motion sensor support depending on the project. VST Lighting can match driver solutions from recognized suppliers such as Mean Well, Sosen, Philips, Lifud, or other suitable options upon request. A reliable driver helps reduce flicker, voltage-related failure, and maintenance pressure in outdoor commercial projects.
Aluminum Housing
The housing protects the fixture from rain, dust, heat, impact, and rough handling during installation. A 150W flood light needs good thermal performance because medium-high power operation still creates serious heat during long outdoor use. VST Lighting can support die-cast aluminum, aluminum alloy housing, 6063 aluminum, corrosion-resistant surface treatment, and black or custom finish options depending on project needs. Proper housing design helps reduce heat buildup, water ingress, surface damage, bracket deformation, and early lumen loss.
Tempered Glass and Optical Reflector
The glass cover and reflector help control light output, beam angle, glare, and fixture protection. For 150W LED flood lighting, optics should match the target area, mounting height, and installation distance. VST Lighting can support tempered glass, PC lens, aluminum reflector, 60°, 90°, 120°, asymmetric, or project-specific optical options depending on model and order requirement. Correct optical design helps improve usable brightness, reduce wasted spill light, and create cleaner coverage for parking lots, yards, billboards, and building exteriors.
PCB and Thermal Interface
The PCB and thermal interface affect current distribution, solder stability, heat transfer, and LED alignment. In a 150W LED flood light, poor PCB design can create hot spots, uneven output, color shift, or early LED failure. VST Lighting can support aluminum PCB, high-conductivity thermal pads, proper soldering, and controlled circuit layout depending on fixture design. A stronger thermal path helps keep LED junction temperature lower, supporting stable brightness, better lumen maintenance, and lower replacement risk in long-hour outdoor applications.
Sealing and Cable Entry
Sealing parts decide whether the flood light can survive outdoor rain, humidity, dust, and cleaning exposure. Water often enters through weak cable glands, glass seals, screw holes, rear covers, gaskets, or driver compartments. VST Lighting checks gasket fitting, cable-entry protection, screw tightening, glass sealing, and housing assembly before shipment. For parking lots, billboards, loading yards, construction sites, and coastal projects, better sealing design helps reduce water ingress, corrosion, driver damage, and after-sales complaints.
Applications of 150w led flood light from VST
Parking lots, car parks, vehicle entrances, and outdoor traffic areas often use 150W LED flood lights where practical wide-area brightness is required at night. These projects need stable lumen output, suitable beam angle, glare control, weather protection, and reliable mounting. Buyers should confirm pole height, fixture distance, target lux, IP rating, CCT, and driver stability before ordering. VST Lighting supports contractors and distributors with sample testing, product selection, and export-ready 150W flood light supply for parking projects.
Billboards, shop signs, entrance signs, advertising boards, and commercial display panels need clean illumination so messages remain visible after dark. A 150W LED flood light can support medium and large signage when beam angle, mounting distance, and aiming direction are selected correctly. Buyers should confirm sign size, installation position, CCT, reflector type, cable length, waterproof structure, and bracket adjustability before production. VST Lighting helps signage buyers select practical flood light options for outdoor advertising projects.
Building exteriors, facades, perimeter walls, hotel entrances, office blocks, warehouse fronts, and public facility surfaces may use 150W LED flood lights for visibility, safety, and architectural presentation. The right optical design can highlight walls without creating excessive spill light or glare. Buyers should confirm beam distribution, installation height, mounting angle, housing finish, weather exposure, and wiring method before ordering. VST Lighting supports commercial lighting distributors with OEM packaging, sample approval, and consistent batch production.
VST Lighting is a China-based LED lighting factory located in Shenzhen. We produce and supply 150W LED flood lights, commercial LED flood lights, industrial LED flood lights, LED high bay lights, LED strip lights, LED profiles, LED tube lights, panel lights, triproof lights, downlights, track lights, fluorescent light fixtures, and customized lighting solutions for B2B buyers.
Our factory is located in Shenzhen, China. Shenzhen gives us access to LED chips, driver suppliers, aluminum housing resources, optical parts, sealing materials, packaging vendors, export logistics, and skilled production workers, helping us support international LED flood light buyers more efficiently.
Yes. We can support private labels, product stickers, carton marks, customized packaging, instruction sheets, cable requirements, bracket options, CCT options, sensor options, and market-specific product details. For distributors and importers, OEM support helps build your local brand while keeping factory-direct supply.
We support flexible MOQ for many 150W LED flood light orders. The final MOQ depends on fixture model, housing type, driver option, beam angle, sensor function, packaging request, customization level, and material availability. We try to support sample orders and trial orders for new customers.
Yes. Sample orders are available so you can check lumen output, CCT, CRI, beam angle, driver stability, waterproof structure, housing strength, bracket quality, packaging, and installation compatibility before mass production. Sample approval helps reduce sourcing risk.
For many regular LED lighting orders, production can often be completed within 2–3 weeks after order confirmation and deposit. 150W flood lights with custom drivers, special optics, motion sensors, special packaging, or certification-related requests may need a longer production schedule.
Certification options vary by model, driver, and destination market. Depending on the SKU, options may include CE, RoHS, UL/ETL, CB, VDE, PSE, SAA, C-tick, RCM, or other compliance documents. Please confirm your required documents before ordering.
Yes. We can support product selection and lighting layout guidance based on area size, mounting height, pole position, target lux level, beam angle, and outdoor environment. For some projects, Dialux simulation support may be available after project details are confirmed.
Yes. Dimming method, motion sensor, photocell, cable length, plug type, bracket structure, housing finish, CCT, CRI, and packaging can be discussed based on product structure and project requirement. Our team will review feasibility before sample production.
Yes. We support long-term cooperation and respond to product, shipment, installation, waterproof issues, driver concerns, bracket problems, replacement, and maintenance questions. If a problem appears, our team reviews the case based on order details and provides practical support.
Choose a 150W LED flood light by checking the application area, mounting height, target lux, beam angle, lumen output, IP rating, driver quality, surge protection, CCT, CRI, and bracket strength. The right fixture should match the site layout and outdoor environment, not only the wattage.
For most projects, confirm these points before ordering:
Application: parking lot, billboard, loading yard, construction site, sports area, building exterior, or security perimeter
Mounting height: wall, pole, bracket, ground stand, or project-specific structure
Lumen output: confirm actual lm and lm/W
Beam angle: 60°, 90°, 120°, asymmetric, narrow, wide, or project-specific
Input voltage: AC 100–240V, AC 100–277V, AC 220–240V, or market-specific
IP rating: IP65 is common for outdoor flood lights
IK rating: useful where impact risk exists
CCT: 3000K, 4000K, 5000K, 6000K, or market-specific
CRI: Ra70–Ra80 for general outdoor use, Ra90+ for special display or inspection areas
Control: on/off, photocell, motion sensor, 0–10V, DALI, or project-specific
For larger outdoor projects, lighting layout support or photometric data is recommended before bulk ordering.
150W LED flood lights provide stronger output and are usually better for wider outdoor areas, higher mounting positions, or longer throw distance. 100W LED flood lights are more suitable for smaller areas, lower mounting heights, and projects where moderate brightness is enough.
| Item | 150W LED Flood Light | 100W LED Flood Light | Best For |
|---|---|---|---|
| Brightness level | Higher outdoor output | Medium outdoor output | 150W for larger spaces; 100W for smaller zones |
| Mounting height | Better for higher or wider coverage | Better for lower mounting positions | Match to pole height and target lux |
| Energy use | Higher power consumption | Lower power consumption | 100W where brightness is enough |
| Heat load | Higher thermal pressure | Lower thermal pressure | 150W needs stronger heat design |
| Common use | parking lots, billboards, yards, sports areas | small yards, signs, entrances, building edges | Depends on site size |
Do not choose 150W only because it looks stronger on paper. If the area is small or the mounting height is low, 150W may create glare, spill light, and unnecessary energy use.
150W LED flood lights are often better for medium-to-large outdoor areas where strong brightness is needed without the power load of a 200W fixture. 200W LED flood lights provide higher output for larger areas, higher poles, wider spacing, or more demanding site brightness.
| Item | 150W LED Flood Light | 200W LED Flood Light | Best For |
| Brightness level | Strong medium-high output | Higher outdoor output | 150W for balanced coverage; 200W for larger zones |
| Fixture size | Usually more compact | Usually larger and heavier | 150W where weight and size matter |
| Heat load | Medium-high thermal pressure | Higher thermal pressure | 200W needs stronger heat control |
| Energy use | Lower than 200W | Higher power consumption | 150W when target lux is met |
| Common use | parking areas, signs, building exteriors, yards | large parking lots, sports areas, wider yards | Depends on mounting height and area size |
For many commercial outdoor projects, 150W can be the better balance between brightness, energy use, fixture size, and installation cost. For very large spaces, 200W may be more suitable.
A 150W LED flood light should provide enough usable lumens to meet the target lux level across the required area. The exact lumen target depends on LED efficiency, beam angle, mounting height, fixture spacing, surface reflection, and light loss factor.
Typical project references:
Parking lots: 75–200 lux depending on safety requirement
Loading yards: 100–300 lux depending on operation
Building entrances: 100–300 lux depending on visibility need
Billboards: depends on sign size, distance, and surface brightness target
Security perimeters: 30–100 lux depending on camera and site design
Sports courts: 200–500 lux or higher depending on activity level
Construction areas: 100–300 lux depending on task level
A basic estimate is:
Required total lumens = target lux × area in m²
Real projects also need beam spread, mounting height, glare control, pole distance, maintenance factor, and spill-light control. For large areas, layout calculation is better than guessing by wattage.
Choose beam angle based on mounting height, target distance, area width, and lighting purpose. Narrower beams provide longer throw, while wider beams cover larger nearby areas.
Typical selection guidance:
30°–45°: billboards, signs, facades, columns, and focused lighting
60°: medium-distance outdoor lighting and controlled coverage
90°: general parking lots, yards, and commercial outdoor areas
120°: wide open spaces with lower mounting height
Asymmetric optics: parking edges, wall-mounted lighting, security perimeters, and loading zones
A wide beam can waste light if the target area is narrow or far away. A narrow beam can create bright spots and dark edges if the area is broad. For pole-mounted projects, confirm the beam angle with the real mounting height and fixture spacing.
IP65 is a common starting point for outdoor 150W LED flood lights because it protects against dust and water jets. For harsher sites with stronger rain, washdown, dust, or coastal exposure, IP66 or higher may be required depending on the project.
Typical IP selection guide:
IP54: protected semi-outdoor areas with limited water exposure
IP65: parking lots, building exteriors, yards, signs, and general outdoor areas
IP66: stronger water spray, industrial yards, coastal exposure, or demanding sites
IP67: temporary immersion or special waterproof applications
For outdoor flood lights, do not check only the IP number. Cable glands, gasket fit, glass sealing, screw holes, rear cover, driver compartment, and installation direction are common failure points.
150W LED flood lights usually fail after rain or in humid areas because water enters through cable glands, glass seals, gaskets, screw holes, rear covers, connectors, or damaged housing. Once moisture reaches the driver or PCB, the fixture may flicker, trip, corrode, or fail completely.
Common causes and fixes:
Weak cable gland: use proper waterproof cable entry
Poor gasket fit: improve sealing structure and assembly control
Loose screws: check tightening and housing closure
Wrong installation angle: avoid water pooling near cable entry
Cracked glass or housing: improve material and packaging protection
Non-rated connectors: use outdoor-rated connectors
Condensation: check temperature change and fixture ventilation design
Wrong IP rating: select IP65, IP66, or higher based on exposure
For rainy, coastal, or high-humidity markets, sample approval should include sealing review and installation method, not only brightness testing.
150W LED flood lights flicker because of poor driver quality, unstable input voltage, incompatible dimming controls, loose wiring, water ingress, overloaded circuits, sensor mismatch, or surge damage. Troubleshooting should start with power supply, driver, wiring, and control compatibility.
Common troubleshooting steps:
Measure input voltage at the fixture
Check terminal and cable connections
Confirm driver rating and fixture wattage
Remove dimmer, photocell, or sensor for testing
Check whether water entered the fixture
Inspect grounding and circuit load
Test the flood light on a stable power source
Confirm dimming type: 0–10V, DALI, Triac, PWM, or other
Inspect surge protection after storm events
If flicker appears after rain or cleaning, moisture ingress should be checked first. If flicker appears only with dimming, driver-control compatibility is likely the issue.
150W LED flood lights overheat when heat cannot move away from the LED chips, PCB, driver, or housing efficiently. Common causes include poor heat sink design, weak thermal interface, excessive ambient temperature, blocked airflow, dust buildup, or unsuitable installation position.
Key prevention points:
Use die-cast aluminum or suitable thermal housing
Match 150W power to the fixture’s heat sink capacity
Confirm PCB and thermal pad quality
Keep airflow around the fixture where possible
Avoid installing near heat sources
Confirm ambient temperature range
Clean dust from heat sink surfaces when needed
Use stable drivers with proper thermal protection
Run samples for several hours before approval
Overheating can reduce lumen maintenance, damage drivers, shift color, and increase replacement cost. For medium-high-power flood lights, thermal review is a key sample approval point.
150W LED flood lights can work with motion sensors, photocells, 0–10V dimming, DALI, or other controls when the driver, sensor, wiring, and housing structure are compatible. Control compatibility should be confirmed before sample approval.
Check these points before ordering:
Sensor type: PIR, microwave, photocell, or external control
Dimming method: 0–10V, DALI, PWM, Triac, or project-specific
Input/output voltage compatibility
Driver compatibility with frequent switching
Detection distance and mounting height
Daylight threshold setting
Standby dimming requirement
IP protection after adding sensor parts
Operating temperature of control components
Security or emergency lighting requirement
For parking lots, perimeters, and low-traffic outdoor areas, sensors and photocells can reduce energy waste. But wrong matching can cause flicker, short cycling, or control failure.
Reduce glare by selecting the right beam angle, aiming direction, mounting height, optical lens, shielding method, CCT, and fixture spacing. Glare control is important because 150W flood lights still produce strong output and can disturb drivers, pedestrians, workers, or neighboring properties if aimed poorly.
Practical glare-reduction methods:
Use asymmetric optics where light must move forward
Avoid excessive wattage at low mounting heights
Aim fixtures downward instead of directly outward
Use proper bracket angle and shielding if needed
Choose medium beam instead of overly wide spread where suitable
Avoid very cool CCT where visual comfort matters
Use layout planning for pole-mounted projects
Check local spill-light or dark-sky requirements if applicable
A bright flood light is not enough. The light should reach the target area without wasting output or creating unsafe glare.
Before approving a 150W LED flood light sample, inspect lumen output, wattage, beam angle, CCT, CRI, driver stability, waterproof structure, housing strength, bracket quality, cable entry, surge protection, packaging, and label accuracy. The approved sample should become the production reference.
Sample approval checklist:
Measure actual power consumption in W
Check brightness and beam distribution
Confirm CCT and CRI
Test driver stability and flicker
Run the fixture for several hours
Check housing temperature
Inspect glass, lens, reflector, screws, and gasket
Review bracket thickness and adjustment strength
Confirm cable gland and cable length
Test sensor, photocell, or dimming if required
Check IP structure and rear cover sealing
Review carton and inner protection
Confirm logo, product label, and manual
For importers and OEM buyers, sample approval should include both performance and export packaging because flood lights can be damaged during transport.
Provide application area, mounting height, target lux, wattage or lumen target, beam angle, input voltage, CCT, CRI, IP/IK rating, control function, bracket requirement, packaging request, certification need, and destination country. Clear information helps the supplier recommend a suitable 150W LED flood light and quote faster.
Useful details to send:
Application: parking lot, billboard, building exterior, yard, construction site, sports court, security, or loading zone
Area size and mounting height
Pole distance or installation distance if available
Target lux level or brightness expectation
Preferred wattage or lumen output
Beam angle or optical distribution requirement
Input voltage and frequency
CCT and CRI
IP rating, IK rating, and ambient condition
Motion sensor, photocell, dimming, RGB, solar, or emergency need
Bracket type and cable length
Logo, label, manual, and packaging needs
Order quantity and sample quantity
Destination market
Required compliance documents per SKU
Shipping terms: EXW, FOB, CIF, DDP, or door-to-door request
With these details, VST Lighting can provide a more accurate quotation, sample plan, product recommendation, and production schedule for your 150W LED flood light order.