The Best Quality LED Fluorescent Tube Replacement Lights Distributor

As you purchase these lighting to sell to end-users converting fluorescent tubes to LED, we offer you business-tailored prices. Also, you get to enjoy a 3-5 years warranty on your bulk orders.
Either in a bid to use the T8 LED replacement bulbs, or T8 LED conversion process on a large scale, we have field engineers who have good experience in converting the fluorescent T8 to LED. You can request their services as necessary. All the LED replacement bulbs for fluorescent tubes have UL marking as well as the ROHS and CE certifications. These LED lights to replace fluorescent tubes are long-lasting and have up to 50,000 hours of runtime.

Reach out to us today to acquire LED lights to replace fluorescent tubes in bulk!

Some Custom Made LED Tube Lights

LED Fluorescent Tube Replacement | The Ultimate FAQ Guide

Introduction

Are you thinking about upgrading your lighting? If positive, LED fluorescent tube replacement is the most effective way in the present time.

Nowadays, people tend to choose more cost-saving, efficient, and environmentally friendly lighting. So, replacing fluorescent tubes with LED tubes is a good choice.

If you are concerned about LED tube retrofit, this ultimate FAQ guide will take care of it. I am here for your convenience.

Let’s start.

Table Of Content

1. What Is Meant By LED Tube Retrofit?
2. Why Should I Replace Fluorescent Tubes With LED Tubes?
3. How Can I Replace Fluorescent Tubes With LED Tubes?
4. Can I Use A LED Tube In A Fluorescent Tube Fixture?
5. Do LED Tubes Need A Ballast To Replace Fluorescent Tube Lights?
6. How To Bypass A Ballast For Replacing Fluoro Tubes With LEDs?
7. Which Color Temperature Is Good For LED Fluorescent Tube Replacement?
8. How Much Cost Can I Save By Replacing Fluorescent Tubes With LEDs?
9. What Is The T8 LED Retrofit Kit?
10. How Difficult Is It To Install A T8 Led Retrofit Kit?
11. How Much Does It Cost To Retrofit LED Tube Lights?
12. What Is The Best Way For Converting Fluorescent Tubes to LED?
13. Do You Need To Change The Dimmer Option To Retrofit The LED Tube Light?
14. How Can I Choose The Best Manufacturer For LED tubes to replace fluorescent tubes?
15. Do I Need A Starter With A LED Tube While Converting Fluorescent Tubes To LED?
16. What Are Single-end And Double-end To Retrofit LED Tube?
17. What Are Magnetic Retrofit Kits In LED Tube Light Replacement?
18. How To Rewire A Fluorescent Light To Retrofit LED Tubes?
19. What Are The Benefits Of The Hybrid Lights In Changing Fluorescent Tubes To LED?

20. What Are The drawbacks Of The Hybrid Tubes In Replacing Fluorescent Lights With LED?

1. Do Plug-and-play Work Without A Ballast?
2. What Are The Pros Of Plug-and-play In LED Fluro Tube Replacement?
3. Why Bypassing The Ballast Is Better Than Plug-and-play To Retrofit LED Tube Light?

FAQs

1. What Is Meant By LED Tube Retrofit?

LED tube retrofit means converting your present lighting fixture to LED.

You need to rewire or change some features for LED tube retrofit. This is essential to get more cost-effective, efficient lighting without replacement.

Sometimes your existing fixture may not support retrofit LED tube light. Then you should choose a full replacement of light to LED.

2. Why Should I Replace Fluorescent Tubes With LED Tubes?

LED fluorescent tube replacement has brought out excellence in lighting nowadays. LED tube light replacement provides some tremendous services. Let’s have a look.

Energy Efficiency

LED tube light saves around 60% more energy than fluorescent tube light.

It can transform maximum electrical energy into light form. Thus, LED tubes replacing fluorescent tubes has become more efficient than other contemporary lighting options.

Longer lifespan

The lifespan of T8 LED replacement bulb is about 50,000+ hours. This is 3-5 times the lifetime of the fluorescent tube.

Lesser Heat Exertion

LED lights don’t burn filament to produce light. It results in emitting less heat.

Moreover, It can produce more light energy compared to fluorescent light.

Ecologically Sound

LED emits most of its lightwave having a wavelength of visible range. So, this is almost free from harmful rays like UV and IR.

T8 LED replacement bulb is shatterproof as well as mercury-free.

So, LED tube light replacement is more environmentally effective than others.

Dimming Option

LED tube lights have dimming capabilities. It can operate within a wide range of power percentages (5%-100%). This makes T8 LED replacement bulbs more efficient than fluorescent tube lights.

Low Voltage Operation

Unlike fluorescent tube lights, T8 LED replacement bulb can operate in low voltage.

Cost-effective

LED tube light replacement saves your electric bill.

Its installation cost is higher than fluorescent lights. But, Its longer lifespan makes it cost-effective in the long run.

Thus, LED fluorescent tube replacement is beneficial to the users at present.

3. How Can I Replace Fluorescent Tubes With LED Tubes?

There are various ways of replacing fluorescent tubes with LED tubes. Here, I am going to explain 2 effective methods of converting fluorescent tube lights to LED. Let’s have a look.

Change the total fixture of T8 fluorescent tubes

You can replace the whole fixture of the fluorescent tube light with the LED tube.

This way of LED tube light replacement is expensive but long-lasting. Again, you have to use additional wires to do this.

Use ballast compatible LED tube

This is also named by plug and play or direct replacement.

If you want to keep the existing fixture, you can use ballast compatible LED tubes for replacing fluorescent tubes.

This tube consists of an integrated driver. This driver can function with the ballast.

You just need to check the compatible ballast list before replacing fluorescent tubes with LED tubes.

Bypass the ballast.

This method of converting fluorescent tubes to LED tube lights is also viable.

This LED tube light replacement process is cost-saving.  This will eliminate the problems caused by the ballast.

Use hybrid LED tube

It’s a mixing of a ballast compatible and ballast bypass system.

This LED tube light replacement is extremely flexible. Besides, it is easy to install.

You should contact a trustworthy manufacturer like VST for smooth LED tube light replacement. They are CE and RoHS certified.

4. Can I Use A LED Tube In A Fluorescent Tube Fixture?

Yes. LED tubes can be applied in a fluorescent fixture while converting fluorescent tubes to LED. But, do you know how?

You can use two ways for replacing fluoro tubes with LED tubes.

These ways are ballast compatible and ballast bypass.

Ballast compatible is a direct process for LED tube light replacement. Here, you don’t need to remove the ballast for replacing fluorescent tubes with LED tubes.

But in the ballast bypass process, you have to remove the ballast. This is around 20% more energy effective than plug-and-play.

5. Do LED Tubes Need A Ballast To Replace Fluorescent Tube Lights?

You don’t need a ballast to replace fluorescent tube lights with LED tube lights.

LED tube lights consist of a built-in LED driver. This driver meets the demand for ballast in LED tube light replacement.

You can bypass and next remove the ballast during replacement.

In LED fluorescent tube replacement, you can also keep the ballast by using a ballast-compatible LED tube. These LED tubes to replace fluorescent tubes will consume 5-10W of more energy.

6. How To Bypass A Ballast For Replacing Fluoro Tubes With LEDs?

Bypassing a ballast for replacing fluoro tubes with LEDs is useful and easy. You just need to follow some fundamental rules for this.

Here are the required steps:

• At first, disconnect the power
• Then, disconnect the wires connected to the ballast
• Next, bind it by using wire nuts
• Now, rewire the fixture.
• Then, install the LED tube

7. Which Color Temperature Is Good For LED Fluorescent Tube Replacement?

You can choose your suitable color temperature for LED fluorescent tube replacement. It mainly depends on where will you install the LED tubes to replace fluorescent tubes.

There are some preferable options for you-

Warm White

This color tone is used in houses, hospitals, restaurants, etc. Its temperature is around 2700K to 3000K.

You will enjoy natural light at this color temperature.

Cool White

This tone, having 4000K temperature is the perfect choice for super shops, offices, etc.

Except for these two, daylight and ultra-warm can also be good for replacing fluoro tubes with LED.

8. How Much Cost Can I Save By Replacing Fluorescent Tubes With LEDs?

LED tube light replacement with fluorescent tubes saves up to 50% to 60% more cost.  So replacing fluorescent tubes with LEDs is effective in terms of cost.

Here is a comparison of costs between 200 fluorescent and LED tube lights. Their operating time is 16 hours a day and 6 days per week.

So, the cost-saving benefit of converting fluorescent tubes to LED is beyond question.

9. What Is The T8 LED Retrofit Kit?

T8 LED retrofit kit helps LED tubes for replacing fluorescent tubes. It is an amalgamation of some essential hardware for LED fluorescent tube replacement.

T8 LED retrofit kit consists of mainly T8 LED light panel and a T8 LED driver. In addition to these, it contains lamp sockets, socket plates, fasteners, etc for T8 LED conversion.

Besides,  there is a reflector for keeping light on the desired area. You can get some screws inside of it. You will utilize these screws to retrofit LED tube light.

If you face a lack of efficiency with your fluorescent tube lights, you can contact VST. It offers you tremendous T8 LED retrofit kits for converting T8 to LED.

10. How Difficult Is It To Install A T8 Led Retrofit Kit?

It is not a big deal to install a T8 LED retrofit kit in LED fluorescent tube replacement. You can easily install it during T8 LED conversion.

• At first, you need to eliminate the existing features.
• Then, read the instruction properly. You will receive a detailed instruction guide with the retrofit kit.
• Rewire the new kit sincerely according to the guide.

You may face complexity in installing T8 LED retrofit for LED tube light replacement.

Then, take the help of an experienced T8 LED replacement bulb expert.

There is a video provided for you to retrofit LED tube light easily:

11. How Much Does It Cost To Retrofit LED Tube Lights?

The cost of retrofitting LED tube light can vary from $10 to $30 for 10w light.

This is related to the wattage of LED lights for replacing fluorescent tubes.

It includes LED retrofit kit cost, installation cost, rewiring cost, electrician cost, etc.

Though installation cost is a little bit high for LED, you can find savings after 5-6 years of use.

So, you can see that LED tube light replacement is a wise decision for its cost-effectiveness.

12. What Is The Best Way For Converting Fluorescent tubes to LED?

Now, the best way for converting fluorescent tubes to LED is using the hybrid tube.

You can get the combination of a ballast compatible and bypass method here.

A Hybrid LED tube consists of all the benefits of direct-fit tubes and ballast bypass. Moreover, hybrid tubes are designed to eliminate the drawbacks of plug-and-play and bypassing the ballast.

This method of converting T8 to LED is easy and flexible. So, you can enjoy the maximum output of replacing fluorescent tubes with LED tubes.

13. Do You Need To Change The Dimmer Option To Retrofit The LED Tube Light?

Yes, you need to change the dimmer to retrofit LED tube light.

All LED tube lights aren’t dimmable. Again, all dimmers aren’t LED compatible. So, when you retrofit LED tube light, you should ensure the compatibility of your dimmer.

If not, you must convert your dimmer to LED compatible. Otherwise, you have to face the consequences like flickering, lessening lifespan, etc.

There are mainly two types of LED dimmer used in LED tubes for replacing fluorescent tubes.

Trailing-edge dimmer

It works for low-wattage lights.

Leading-edge dimmer

It can operate for high-wattage lights.

LED tube light’s power consumption is low. So, if you like to use LED tube light having low wattage, choose trailing edge dimmer during LED fluoro tube replacement.

Again, you must check whether your LED tubes for replacing fluorescent tubes are dimmable or not. This mainly depends on the LED driver.

A dimmable LED driver can function on various current stages through Pulse Width Modulation.

Sometimes analog dimming is used in replacing fluorescent tubes. You should resolve this matter before retrofitting LED replacement bulbs for fluorescent tubes.

You may visit VST for T8 LED compatible dimmer for T8 LED retrofit.

14. How Can I Choose The Best Manufacturer For LED tubes to replace fluorescent tubes?

The market for LED tubes to replace fluorescent tubes is growing to a great extent. So, choosing the best manufacturer for LED replacement bulbs for fluorescent tubes is a brainstorming task.

But, don’t worry. I am here for you.

You should look for some criteria. On that basis, you can choose the best LED lights to replace fluorescent tubes.

The best manufacturer should have

• Certification of CE and RoHS.
• A long term warranty for LED lights to replace fluorescent tubes
• Supply of the best solutions for different issues like dimmer options, ballast compatible LED tubes, etc for replacing fluorescent tubes with LED tubes.
• A detailed instruction guide of LED fluoro tube replacement.
• Bunch of expert electricians for replacing fluorescent tubes with LED tubes.
• Customized LED tube lights for LED fluoro tube replacement.
• Well developed retrofit kits for LED lights to replace fluorescent tubes
• A well-researched description of the versatile ways of LED fluorescent tube replacement.

You can visit VST for enjoying LED lights to replace fluorescent tubes having these features.

15. Do I Need A Starter With A LED Tube While Converting Fluorescent Tubes To LED?

You don’t always need a starter with LED lights to replace fluorescent tubes.

It actually depends on your T8 LED conversion procedure and types of LED tubes replacing fluorescent tubes.

You can get LED tubes to replace fluorescent tubes in 3 ways.

Direct-Fit (Type A)

It is also called plug-and-play. Here you can swap out the fluorescent fixture with LED tubes by keeping the ballast.

Ballast Bypass (Type B)

Here, you don’t need to use a ballast. You can bypass the ballast in changing fluorescent tubes to LED.

Hybrid LED Tube (Type A and Type B)

This is a mash-up of Type A and Type B. That means you can use this as direct wire by using ballast. Again, you have an opportunity not to use ballast in T8 LED retrofit.

You just adjust it to line voltage after the failure of the ballast.

So, I think you have a clear conception of the necessity of ballast in LED fluorescent tube replacement now.

16. What Are Single-end And Double-end  To Retrofit LED Tube?

Are you confused by the terms single-ended and double-ended LED lights to replace fluorescent tubes? You need to have a clear conception to retrofit LED tubes.

Nothing to worry about. I am explaining these types of T8 LED retrofit in simple words.

Single-ended (One-end ) LED tubes

One-ended LED tubes to replace fluorescent tubes actually consist of a neutral and a live pin. Both of them are located on the same side of the tube.

To retrofit single-ended LED lights to replace fluorescent tubes, you need to use non-shunted lampholders instead of shunted holders.

Again, there is no use of ballast for one-ended LED tubes in replacing fluorescent tubes.  So, you have to remove the ballast in LED fluorescent tube replacement.

Double-ended LED tubes

Here, the position of live and neutral pins is on the opposite side of LED lights. Two pins are set in iso-potential points.

Unlike one-ended tubes, dual-ended LED lights to replace fluorescent tubes use shunted lampholders.

But, double-ended ballast bypass (DEBB) can use both of the lampholders. DEBB doesn’t use ballast in LED fluorescent tube replacement also.

If you want to experience both of these two LED tubes to replace fluorescent tubes, contact VST. It always provides the perfect products for you in LED fluorescent tube replacement.

17. What Are Magnetic Retrofit Kits In LED Tube Light Replacement?

LED magnetic retrofit kit is a good solution in LED tube light replacement. It is used for direct replacement to retrofit LED tubes.

You can install it within a short time for LED tube light replacement.

There is an option of magnetic mounting. It helps in rapid T8 LED retrofit.

Again, you can use it with different luminaries. Its quick fitting makes it an energy saver for replacing fluorescent tubes with LED tubes.

Magnetic retrofit kits work for reducing repeated electrician cost, replacement cost, etc. Besides, you can enjoy consistency in the output of LED lights to replace fluorescent tubes. It offers you long-term efficiency.

So, You may try magnetic T8 LED retrofit kits of VST for a smooth LED fluorescent tube replacement.

18. How To Rewire A Fluorescent Light To Retrofit LED Tubes?

To rewire a fluorescent light to retrofit LED tubes, you need to follow a series of instructions.

• First, you have to disconnect the fixture power from the source for changing fluorescent tubes to LED.
• Then, cut the wire
• Eliminate ballast and starter
• Now, cut all the wires connected to the socket and remove them
• Now the rewiring starts. Connect L and N wires to both ends of the tube.

Here H and L indicate Hot and Neutral respectively.

• Adjust the LED lights to replace fluorescent tubes to the socket.
• Connect the power of the fixture and turn on the power.

You can watch the following video for a convenient rewiring in LED fluorescent tube replacement.

19. What Are The Benefits Of The Hybrid Lights In Changing Fluorescent Tubes To LED?

Hybrid tubes have brought out immense facilities in changing fluorescent tubes to LED. Like-

Flexibility

Hybrid LED lights to replace fluorescent tubes can function with or without ballast. You can use them like plug-and-play for an LED replacement for T8 fluorescent tubes.

But, when the ballast expires, you just need to connect it directly with the line voltage. Here, LED lights to replace fluorescent tubes consists of an internal driver

So, you can solve the problems of ballast failure easily by replacing fluorescent tubes.

This brings huge flexibility in LED fluorescent tube replacement.

Easy installation

Its installation procedure is very simple.

Here, you don’t need any change of wiring for an LED replacement for T8 fluorescent tubes.

Thus, hybrid LED tubes are getting popular among users for LED fluorescent tube replacement. You can check VST hybrid LED lights to replace fluorescent tubes to enjoy the optimum benefits of lighting.

20. What Are The drawbacks Of The Hybrid Tubes In Replacing Fluorescent Lights With LED?

Despite being highly effective, Hybrid tubes come to you with some drawbacks in replacing fluorescent tubes also.

Rewiring

Hybrid tubes rewiring can bring some complexity to you in LED fluorescent tube replacement. If you are not confident about the LED replacement for T8 fluorescent tubes properly, it is a burden.

But, it is not a big deal in case you follow the instructions for replacing fluorescent tubes carefully.

Risk Factor

In the case of the hybrid LED lights to replace fluorescent tubes, there is always a risk of getting an electric shock.

After ballast removal, you need to connect it to the line voltage directly.  That’s why there you experience a risk factor in replacing fluorescent tubes.

These pitfalls of hybrid tube systems can be solved to retrofit LED tubes.

So, why don’t you think about hybrid LED tubes for LED fluorescent tube replacement?

21. Do Plug-and-play Work Without A Ballast?

YES. Plug-and-play can work without a ballast.

Plug-and-play is an easy LED fluorescent tube replacement process. Unlike a ballast bypass system, here you don’t require removing a ballast.

But, using the existing ballast creates some difficulties. The ballast doesn’t last long. That means you need to change your fixture after the failure of the ballast.

So, you have to look after the maintenance of the ballast after LED tube lights replacement.

22. What Are The Pros Of Plug-and-play In LED Fluro Tube Replacement?

Plug-and-play in LED Fluro tube replacement offers you some superb benefits.

Easy Installation

You can simply install plug-and-play for LED fluoro tube replacement. You have to follow some basic instructions to upgrade your fixture.

Cost-saving

Plug-and-play doesn’t require rewiring. Again, you don’t need to remove your present ballast.

So, when you prefer replacing fluorescent tubes through plug-and-play, you can save the cost related to these operations.

Protection of Ballast

In this process, ballast remains untouched. So, ballast can control the current flow smoothly. This makes you safe from the dangers of fixtures.

So, plug-and-play is almost an effortless solution for LED lights to replace fluorescent tubes.

23. Why Bypassing The Ballast Is Better Than Plug-and-play To Retrofit LED Tube Light?

While you want to retrofit LED tubes, the ballast bypass system is better than the plug-and-play in many aspects.

Maintenance of ballast

Plug-and-play keeps the ballast of LED lights to replace fluorescent tubes intact. So, it demands regular maintenance to work smoothly.

On the contrary, there is no need for ballast in the ballast bypass system. You can remove the ballast for replacing fluorescent tubes.

Again, there is a tension of ballast failure in plug-and-play. You can be free from that headache in the case of ballast bypass.

Power consumption

Removal of the ballast makes the ballast bypass process energy efficient in replacing fluorescent tubes. Ballast consumes significant power.

Cost

Bypassing the ballast indeed requires a higher initial cost than plug-and-play in replacing fluorescent tubes. But, low power consumption makes it cost-effective in the long run.

Besides, your cost will increase to replace the failed ballast.

Convenience

In the Plug-and-play system, you can use ballast compatible LED tubes in replacing fluorescent tubes. But, these LED lights to replace fluorescent tubes only can operate with some fixed fixtures.

This property makes it inconvenient compared to the ballast bypass in T8 LED retrofit.

Conclusion

This is the sum-up of almost all queries related to LED fluorescent tube replacement. This FAQ guide may make you aware of the pros and cons of LED tube retrofit. I have tried to answer all the questions in a simple tone.

I hope you will get benefited from this FAQ guide. If you want to know any further information about lighting, please stay with us.

Be happy and safe.